Miele PWM 912 Bedienungsanleitung Seite 83

Rescue Clothing programs
Helmets*
Type of fabric
Program se-
quence
Extras
* The safety helmet manufacturer must allow the helmet to be washed or dried by machine.
Before loading the machine, push the sliding visor, if applicable, into the safety helmet.
Place one helmet in each of the padded protective bags provided and close them.
The protective bags are available to order from Miele Customer Service.
Remove easily removable attachments from the helmet and wash in a separate washing
net.
Gloves
Type of fabric
Program se-
quence
Extras
After washing, air-dry the gloves with and without leather trim. Before drying, roll the
leather gloves or gloves with leather trim through your hands to maintain the elasticity of
the leather.
Belts*
Type of fabric
Program se-
quence
Extras
* The belt manufacturer must allow the belt to be washed by machine.
If there are aluminum attachments on the belts, we recommend using a delicates liquid detergent with reduced pH value
which is particularly effective for dissolving pigmentation stains.
140°F/60°C (Cold to 140°F/60°C)
Firefighter helmets
Pre-wash up to 105°F (40°C)
Main wash up to 140°F (60°C), wash time 16 min
3 rinses, drainage
Soak, Rinse plus
105°F/40°C (Cold to 105°F/40°C)
Gloves with and without leather trim
Main wash up to 105°F (40°C), wash time 9 min
3 rinses
(3rd rinse with option of leather care, 95°F/35°C)
Final spin
Soak, Water plus, Rinse plus
105°F/40°C (Cold to 105°F/40°C)
Fire department belts also with aluminum com-
ponents and leather trim
Main wash up to 105°F (40°C), wash time 8 min
3 rinses
Final spin
Pre-wash, Rinse plus
en - Program overview
Fill ratio/Load
size
PWM 912 –
3 helmets
PWM 916 –
4 helmets
PWM 920 –
5 helmets
Fill ratio/Load
size
PWM 912 –
23 pairs of gloves
PWM 916 –
29 pairs of gloves
PWM 920 –
38 pairs of gloves
Fill ratio/Load
size
PWM 912 –
8 belts
PWM 916 –
12 belts
PWM 920 –
15 belts
83