Miele PWM 912 Bedienungsanleitung Seite 77

Cloths ch-th Dis. 20 min
Type of fabric
Program se-
quence
Extras
Cloths Ch-th Dis. 10min+rtu 160°F (70°C)
Type of fabric
Program se-
quence
Extras
Cloths Ch-th Dis.20min+rtu
Type of fabric
Program se-
quence
Extras
140°F (60°C)
Cotton, viscose, polyester, and microfiber clean-
ing cloths
Pre-rinse
Pre-wash up to 85°F (30°C)
Disinfection 140°F (60°C), holding time 20 min
3 rinsing baths (optional disinfection rinse can be
activated)
Final spin
Soak, Intensive, Rinse plus, Fill stop, Rinse hold
Cotton, viscose, polyester, and microfiber clean-
ing cloths
Program sequence as for Cloths chemo-thermal
disinfection,
then set the residual moisture via the extra " –
" (moist, damp, wet, dripping wet)
The pre-set residual moisture is 2 drops (damp)
Pre-wash, Soak, Intensive, Rinse plus, Fill stop,
Rinse hold
140°F (60°C)
Cotton, viscose, polyester, and microfiber clean-
ing cloths
Program sequence as for Cloths chemo-thermal
disinfection,
then set the residual moisture via the extra " –
" (moist, damp, wet, dripping wet)
The pre-set residual moisture is 2 drops (damp)
Pre-wash, Soak, Intensive, Rinse plus, Fill stop,
Rinse hold
en - Program overview
Fill ratio/Load
size
PWM 912 – 13 lb
(6.0 kg)
PWM 916 – 18 lb
(8.0 kg)
PWM 920 – 22 lb
For number,
"Cleaning cloths
load size" chart
1:18
(10 kg)
see
77