PINARELLO NYTRO E Bedienungsanleitung Seite 15

2. DESCRIPTION OF THE PINARELLO
NYTRO BICYCLE
11
2
1
10
9
Brakes Wheels
1 5
Seat Post
2 Headset
6
3 Crankset Handlebar
7
Battery
4 8 Stem
28
8 7
6
4
3
1
5
Groupset
9
Cassette
10
Saddle
11
3. FIRST RIDE WITH YOUR NYTRO
1. Before riding your Nytro bicycle for the first time, it is a good idea to spend some time with your
Pinarello dealer to fine-tune the set-up, so that it meets users' specifications and all components
operate in the proper working ranges. For some additional details on adjustments, refer to the
manual section "Before every ride".
2. Get to know your bike. The ride characteristics of a pedelec are specific to the hybrid
propulsion system and differ substantially from the ride of traditional bicycles. Because of this,
you should begin by familiarising yourself with the lowest level of assistance, riding in a known
space and away from risks to yourself and others.
3. The Pinarello Nytro bicycle is designed to support a maximum weight of about 120 kg (265
lbs), including bike, rider, luggage and accessories. Make sure you do not exceed this limit.
4. Ask your trusted Pinarello dealer to help you check that the pedelec is equipped with all the
devices required by the road traffic laws in force where you will be using it.
5. Check the battery level of the pedal assist system. The battery must be charged before
first use. Further instructions on battery use and charging are found in the section "Use and
maintenance of the battery and battery charger", and in the motor manufacturer's user manual.
We recommend that you charge the battery during daylight hours and only
in dry areas with smoke or fire detectors. Do not charge the battery in a
bedroom. When charging, ensure that the bike is safely positioned away from
other objects and keep it away from flammable objects.
Only charge the battery using the charger supplied with the bike. Never use
any other manufacturer's charger, even if the plug is compatible.
6. Familiarise yourself with the pedal assist functions. These are operated by the remote control
mounted on the top tube near the head tube (on the top tube or on the handlebar, depending on
the model version). For further details on the control and features of the pedal assist functions,
see the "User Interface" section of this manual and the motor manufacturer's user manual.
Notice: When mounting the bike, be careful not to engage the pedals before
you are in the correct position, with your hands firmly on the handlebar. There
is a risk that you could unintentionally activate the pedal assist before you
have full control of the bike, resulting in a fall.
7. Check and familiarise yourself with the braking system. The brakes assembled on this bike
could have much greater stopping power than the ones you are used to. Test the brakes to
become familiar with their use. Check that the levers operate the brakes in the combinations you
are used to. Except for some countries, the combinations are usually the right lever for rear brake,
left lever for front brake. Familiarise yourself with the different combinations.
8. Familiarise yourself with the shift system and its operation, unless it is similar to a system you
are used to.
9. Check the height of the frame, saddle and handlebar. The top tube should be one hand's
width below your groin. The saddle should be set so that while seated, your heel barely reaches
the pedal at the lowest point of rotation. Once in the saddle, make sure you can touch the floor
with your toes. Your Pinarello dealer can help with set-up and offer more detailed advice.
10. If you your bicycle is equipped with quick-release or clipless pedals, ask your Pinarello dealer
to help you set up and become familiar with their use.
29