hanseatic HWMK814B Gebrauchsanleitung Seite 83

2. Secure the other end on the water inlet
hose to the tap by hand. Then turn the
union nut (29) clockwise.
3. Open the valve completely and check
whether the connections on the appliance
and on the valve are sealed.
4. Then close the tap again.
Creating an electrical
connection
WARNING
Risk of electric shock!
Touching live parts may result in severe
injury or death.
■ Do not put into operation if the
mains cord is faulty or the appliance
displays other visible damage.
■ Never connect the appliance via a
multiple socket.
• Plug the mains plug into a properly in-
stalled and earthed electric socket that
has been sufficiently secured (220–240 V,
50 Hz, 10 A).
Installation, connection and initial commissioning
First use/Test run
The appliance requires an initial wash cycle
without laundry, but with detergent. The aim
(29)
of this is to rinse out possible residues from
production.
1. Dispense a maximum of 25 ml of compact
2. Make sure that the drum is empty.
3. Push the loading door (14) tightly closed.
4. Carry on, as described in chapter "Opera-
First use is completed once the cycle has fin-
ished.
detergent into the left chamber II.
tion: Standard cycles" on page EN-19; use
the "Cotton" cycle here.
Page EN-37