Lan Mode (Lan Cable) - VOLTCRAFT CT-20TDR Bedienungsanleitung

12. LAN mODe (LAN CAbLe)

LAN mode: Test/measure LAN cables.
Review the following display overview for LAN mode before beginning testing:
LAN MODE
LOOP
123456780 FTP
2
||||||||| PASS
123456780
Ill. 1
1 Mode: "LOOP" or "REMOTE" (with remote test port)
2 Conductors
3 Cable type: FTP + 0 (shielded) or UTP (not shielded)
4 Result: "PASS" (positive result), "FAIL" (negative result)
5 Memory slot
6 ID display for remote test port
7 In case of "FAIL" (negative) reading: "OPEN" (open circuit), "SHORT" (short-circuited), "CROSS"
(incorrect connection), "SPLIT" (split, not for remote test port! Min. length: 1 m)
a) Connection – LOOPbACK
Connect one cable end to the RJ-45 jack mAIN and the other to the RJ45 jack LOOPbACK (1).
b) Connection – Remote test port
For installed cables.
Connect one cable end to the RJ-45 jack mAIN and the other to the RJ-45 jack (15) on the remote
test port (14).
1
3
4
LAN MODE
REMOTE
12345678 UTP
|||||||| FAIL
12345678 OPEN
5
MR-1
ID-1
6
7
35