cecotec Cumbia POWER MATIC-CCINO CREMMA Bedienungsanleitung Seite 4

- No utilice el aparato si alguna pieza presenta daños o si el
aparato no funciona correctamente.
- La superficie del elemento calefactor está sometida a calor
residual después del uso.
- No intente abrir el cuerpo principal o desmontar cualquier
parte del aparato, ya que no hay ninguna pieza reparable en
su interior.
- No sumerja el cable, el enchufe o cualquier otra parte del
aparato en agua o cualquier otro líquido, ni exponga las
conexiones eléctricas al agua. Asegúrese de que tiene las
manos completamente secas antes de tocar el enchufe o
encender el aparato.
- No se recomienda el uso de accesorios no incluidos con el
producto. Podría ser peligroso.
- Si al utilizar la función de agua caliente, se vacía el depósito
de agua por completo, deberá esperar un tiempo prudencial
para volver a activar esta función.
6
POWER MATIC-CCINO CREMMA
SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the product.
Keep this instruction manual for future reference or new users.
- This product is exclusively designed for household use. It is
not suitable for commercial or industrial use. Do not use the
device outdoors.
- It is your responsibility to make sure every user is informed
about the warnings and precautions stated in this instruction
manual. Do not use the appliance for any use other than the
one specified in the manual.
- WARNING: an incorrect use of the appliance can endanger
both the appliance and the user.
- Make sure that the mains voltage matches the voltage
stated on the rating label of the device and that the wall
outlet is grounded.
- Check the power cord regularly for visible damage. If the
cord is damaged, it must be repaired by the official Technical
Support Service of Cecotec to avoid any type of danger.
- When filling up the water tank, be careful to avoid spillage,
especially on the pipe and electrical parts of the appliance.
- Unplug the appliance from the mains in any of the following
circumstances:
A. Before filling up the water tank.
B. Before removing or installing any of the appliance's parts.
C. Before cleaning or maintenance.
D. When the appliance is not working properly.
E. After use.
- Empty the water tank when the appliance is not going to be
used for some time.
- Make sure the appliance has cooled down completely before
removing or installing parts and before cleaning it.
7
POWER MATIC-CCINO CREMMA