cecotec Cumbia POWER MATIC-CCINO CREMMA Bedienungsanleitung Seite 29

ENGLISH
(20) for 5 seconds. The machine will beep, and both
will flash.
Press the strong-coffee button (20) to confirm the start of the descaling process. To
6.
cancel the descaling process and return to Standby mode, press the On/Off button (32).
Please note
If you cancel the descaling process, the icon
will flash to indicate that descaling is in progress.
7.
Caution: keep skin and other body parts away from hot water.
When all the water in the tank is dispensed,
8.
Remove any remaining cleaning solution from the water tank, rinse it, and refill it with
clean water up to the Max mark. Empty the collecting container and place it back under
the coffee spout. When the water tank is reinstalled,
then carry out a rinsing process, dispensing half a tank of water first and then waiting for
about a minute before dispensing the rest of the water in the tank.
When the rinsing process is finished, the machine switches off automatically.
9.
Please note
To ensure that the descaling process is complete, be patient during the process and make sure
the appliance has switched off automatically.
System-emptying function
It is recommended to use the system-emptying function before a long period of inactivity, to
protect the appliance against frost and before repairing the product.
In Standby mode, press and hold the On/Off button (32) and the mild-coffee button (21)
1.
for 5 seconds.
will start flashing.
2.
Remove the water tank from the product.
3.
system-emptying function is being carried out. You can press the On/Off button before
removing the water tank to cancel the process and return to Standby mode.
When the system-emptying function is completed, the appliance will automatically
4.
switch off.
Important
After performing the system-emptying function, when using the machine again, press the
hot-water button until the machine dispenses water before using any of the functions.
Manual rinsing
You can perform a manual rinse cycle to clean both the coffee spout and the milk spout after
use. A manual rinsing is also recommended if the appliance has not been used for a long period
of time.
56
POWER MATIC-CCINO CREMMA
and the strong-coffee button
will not disappear.
and the strong-coffee button (20) will flash.
will turn off. The appliance will
will light up steadily to indicate that the
Place an empty container under the adjustable coffee spout.
1.
In Standby mode, press and hold the On/Off button (32) and the hot-water button (25).
2.
The machine will beep twice, and the hot-water button will flash. Both the milk and the
3.
coffee spout will then dispense a small amount of water used for rinsing.
Danger: the water dispensed is hot. Avoid contact with water or splashing.
After rinsing, the machine will return to Standby mode.
4.
Cleaning of the appliance
Unplug the cord from the power supply.
1.
Discard the drip-tray water.
2.
Use a damp cloth or a non-abrasive cleaning agent to clean water stains from the
3.
appliance.
Important
Do not use any abrasive cleaning agents, descaling agents, or vinegar to clean the appliance.
Cleaning the ground-coffee outlet
The ground coffee may stick to the outlet wall of the machine after using it for a long time. It is
recommended to clean the outlet frequently by following these steps to ensure the machine
can dispense ground coffee.
Press on the cover's bottom part.
1.
Remove the side cover.
2.
Press the sides of the brewing unit.
3.
Remove the brewing unit.
4.
Rinse the brewing unit under running tap water. Allow it to dry completely before
5.
reinstalling.
Use the cleaning brush to clean the ground-coffee outlet and remove any remaining
6.
ground coffee or coffee beans from the machine. Fig. 20
Use a cloth to clean the inside of the appliance thoroughly. Dry up the appliance completely
7.
before placing the cover back on.
ENGLISH
57
POWER MATIC-CCINO CREMMA