cecotec Cumbia POWER MATIC-CCINO CREMMA Bedienungsanleitung Seite 25

ENGLISH
29. If the icon remains steady: the brewing unit is not installed or installed incorrectly.
If the icon flashes: the side cover is open or not correctly placed.
30. If the icon remains steady: the coffee machine must be descaled.
If the icon flashes: ongoing descaling process.
31. The system-emptying function is underway.
32. On/Off button.
Accessories
The product includes three sachets of cleaning product for the self-cleaning process.
NOTE
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the Technical Support Service
of Cecotec.
3. INSTALLATION
Remove protective plastic, stickers, and any other packaging material from the device.
1.
Place the appliance on a safe and stable surface with an accessible socket outlet and a
2.
minimum distance between the walls of the appliance and other appliances. Fig. 3
3. Fill up the water tank with water (see section "Filling up the water tank").
Fill up the coffee-bean container with coffee beans (see 'Filling up the coffee-bean tank').
4.
Unwind and pull out the power cord and insert the connector into the back of the machine.
5.
Insert the other end of the power cord into an outlet of suitable voltage.
Tip
No self-cleaning will be carried out if the appliance is switched off for a short time. You can
toggle this function by following these steps if active or activate it if deactive.
48
POWER MATIC-CCINO CREMMA
Step 1: remove the side cover.
Step 2: press the On/Off button until the device beeps.
Please note
Press the hot-water button to clean the inside of the machine before first use.
4. OPERATION
Filling up the water tank
When flashes, it indicates that the water tank has a low water level, and you should fill it up.
Lift the water tank by using the lid as a handle. Fig. 4
1.
Rinse the water tank with drinking water, fill the tank to the Max mark, and place it back in
2.
the machine. Make sure it is properly placed.
Please note
To prevent water from spilling out of the water tank, do not use a container to pour water
directly into the tank. Fig. 5
Important
Never fill up the water tank with hot water, lukewarm water, carbonated water, or any other
liquid that may damage the tank and the machine.
Filling up the coffee-bean tank
If flashes, it indicates that you should fill up the coffee-bean tank:
Remove the coffee-bean tank cover.
1.
Carefully put in the coffee beans.
2.
Put the tank cover back on.
3.
Important
Only fill up the coffee-bean tank with natural-roast coffee beans. The use of ground coffee,
instant coffee, caramelised coffee, or any other object could damage the appliance. Never use
unroasted coffee, high-roast coffee, or a blend of natural and high-roast coffee.
Preparing mild and strong coffee
Make sure the drip tray is placed under the coffee spout and that water tank is filled up.
1.
Then, press the On/Off button to switch on the machine. The hot-water button will start
flashing and the machine will automatically rinse and spurt water from both the milk and
the coffee spouts. You can cancel this process by pressing the hot-water button.
Once rinsing is finished, the function buttons on the control panel will activate (Standby
2.
mode) indicating the appliance is ready for coffee making.
Place a glass or cup under the coffee spout and adjust the spout's height based on the
3.
ENGLISH
49
POWER MATIC-CCINO CREMMA