Trouble-Shooting - BWT Protector BW Einbau- Und Bedienungsanleitung

10. Trouble-shooting

Faul
Water pressure in system has
dropped considerably; Water
pressure drops considerably
when water is bled (by more
than 35% of the static pressure)
Flushing water outlet cannot
be closed
If the fault cannot be rectified using these notes, please contact a specialist firm or our Customer
Service.
13592_EBA BWT Protector BW_331915-7.indd 13 13592_EBA BWT Protector BW_331915-7.indd 13
Cause
Dirty filter element
Backwash element does not
reach final position due to
coarse dirt particles
Solution
Carry out backwash
Fully open and close turning
knob; repeat backwash several
times
EN
13
17.08.22 07:53 17.08.22 07:53