Startup; Operation; Maintenance; Warranty - BWT Protector BW Einbau- Und Bedienungsanleitung

EN

6. Startup

Check the filter and the flushing water pipe for
proper installation.
The stop valves must not be opened yet. Check
the transparent cylinder (3) for proper fit and then
close the turning knob (5) by turning it clockwise.
Slowly open the stop valves before and after the
domestic water station and deaerate the water
pipe at the next outlet after the domestic water
station.
Slowly open the stop valves before and after the
filter and deaerate the pipework at the air bleed
closest to the filter (after the filter).
Before backwashing provide a collecting basin, if
the flushing water pipe is not connected to the
waste water system.
Open the turning knob counter-clockwise until
you can hear water running out and then close it
again.
Check whether the filter is correctly sealed.

7. Operation

A backwash must be carried out once a month to
prevent dirt particles from settling on the filter
cloth (or more frequently with higher amounts
of dirt).
Before starting the backwash procedure, provide
a collecting basin, if the flushing water pipe is not
connected to the waste water system.
Backwashing
Open the turning knob (5) counter-clockwise until
you can hear water running out and then close it
again. Check whether the filter is correctly sealed.
The plastic parts may only be cleaned with a
soft, damp cloth. Do not use any solvents or de-
tergents nor acid cleaners.
12
13592_EBA BWT Protector BW_331915-7.indd 12 13592_EBA BWT Protector BW_331915-7.indd 12

8. Maintenance

All technical equipment requires regular mainte-
nance.
The maintenance must be carried out by expert
technical staff who also replaces the parts subject
to wear and tear. We therefore recommend clo-
sing a maintenance contract.
A backwash must be carried out every 6 months
to prevent dirt particles from settling on the filter
cloth (or more frequently with higher amounts of
dirt).

9. Warranty

In the event of malfunction during the warranty
period (6 month) please contact our Customer
Service and state the filter type and the produc-
tion number (see Specifications or rating plate).
Any warranty work may only be carried out by
our Customer Service.
Warranty work to be carried out by an external
specialist firm requires the express consent of our
Customer Service Manager.
Qualified staff:
The product may only be installed, commissioned
and serviced by skilled personnel.
Only trained persons are allowed to operate and
use it.
Trained person:
Has received instruction and studied the informa-
tion in this document concerning the tasks ent-
rusted to him/her, and the possible risks in the
event of inappropriate behaviour.
Skilled personnel:
Based on the professional training received,
knowledge and experience, and knowledge of
the relevant definitions, is qualified to install the
product, to commission and to service it.
17.08.22 07:53 17.08.22 07:53