Alutech AM0/R-Sm Bedienungsanleitung Seite 8

9. SCOPE OF SUPPLY
9.1 Scope of supply for electric motors of the AM0/R-Sm series
The set of the electric motor is placed in a packing cardboard box and includes:
1. Electric motor with a 2m cable, assembled with adapters for octagonal roll tubes* 40mm - 1pc.
2. Set of fasteners and hardware components in a plastic bag - 1 pc., consisting of:
2.1 mounting plate - 2 pcs.
2.2 cotter pin for fixing the plates - 2 pcs.
2.3 convex washer - 2 pcs.
2.4 self-tapping screw for fixing the plate to the electric motor - 2 pcs.
2.5 self-tapping screw for fixing the plate to the side roller shutter covers - 3 pcs.
2.6 plastic tie for fastening the electric motor cable - 1pc.
3. Operation manual - 1pc.
4. Illustrative part of the operation manual - 1 pc.
9.2 Scope of supply for electric motors of the AM1/R-Sm series
The set of the electric motor is placed in a packing cardboard box and includes:
1. Electric motor with a 2m cable, assembled with adapters for octagonal roll tubes * 60mm - 1pc.
2. Set of fasteners and hardware components in a plastic bag - 1 pc., consisting of:
2.1 mounting plate complete with a spring ring - 1pc.
2.2 convex washer - 4 pcs.
2.3 self-tapping screw for fixing the plate to the electric motor - 5 pcs.
2.4 self-tapping screw for fixing the plate to the side roller shutter covers - 4 pcs.
2.5 plastic tie for fastening the electric motor cable - 1pc.
3. Operation manual - 1pc.
4. Illustrative part of the operation manual - 1 pc.
*octagonal roll tubes manufactured by ALUTECH, not included in the scope of supply for the electric motor.
10. WAREHOUSING, TRANSPORTATION AND RECYCLING
The product must be stored packaged in closed and dry rooms. Influence of atmospheric fallout or direct sunlight is
forbidden.
Storage period must not exceed 3 years from the production date.
All types of closed aboveground transport can carry out the transportation, avoiding bumps and moving inside of
.
transport
Recycling is performed according to regulatory and legal acts about utilization and recycling used in country of
consumption. The products do not contain any metal of value or agents, which pose hazard to life, health or
environment.
Packing should be disposed of in accordance with applicable regulations.
11. WARRANTY
1. The Seller guarantees full operability of the product when it is used in full compliance with the user manual, if the
mounting process is carried out by an Organization that has been authorized by the Supplier
2. During the warranty period, faults caused by the fault of the Manufacturer or the organization authorized by the
Supplier that installed the product, shall be eliminated by the Supplier.
3. The warranty does not apply in cases involving:
• failure to comply with installation, operation and use regulations;
• installation, adjustment, repair, reinstallation or modification of the product by persons not authorized by the Supplier;
• damage to the product caused by unstable operation of the power supply network or mismatching of the power
supply network with the values set by the Manufacturer;
• force majeure (fires, lightning strikes, floods, earthquakes and other natural disasters and emergencies);
• occurrence of malfunctions and defects caused by the inoperability of roller shutter systems;
• the fields in sections 12, 13 of this manual are not fully filled in.
Note: parts replaced under warranty become the property of the Supplier.
4. The warranty period is 3 years and is calculated from the date of installation.
8
.