Technical Characteristics - Alutech AM0/R-Sm Bedienungsanleitung

English
1. DESCRIPTION
Tubular electric motors of the AM0/R-Sm, AM1/R-Sm series are designed for automation of roller shutter systems (roller
shutters). These electric motors provide ample opportunities for remote control of roller shutter systems using radio
remote controls, via the Internet using the ALUTECH Smart mobile application, voice assistants, other ALUTECH interfaces
and automation devices. To use all functionality, you must use compatible devices such as Zigbee ZB-Sm module, Zigbee
gateway, and others. You can find more information on alutech-group.com or by contacting the Supplier.
Tubular electric motor of the AM0/R-Sm, AM1/R-Sm series comprises an induction condenser motor with thermal
protection, a brake, a gear box, a control unit with an in-built radio receiver and electronic limit switches. Installed into
octagonal roll tubes.

2. TECHNICAL CHARACTERISTICS

It is advised to select the optimal model of the electric motor with the required torque depending on the weight of the
roller shutter curtain and the operating time, according to the requirements of ALUTECH instructions and
recommendations. If necessary, contact the Supplier's customer service for advice.
These technical characteristics are applied to the ambient temperature of 20°С (±5°С) and supply voltage of
230V/50Hz.
Table 1 – Technical characteristics of electric motors of AM0/R-Sm, AM1/R-Sm series
Model
AM0/06-28R-Sm
AM0/10-19R-Sm
AM1/10-13R-Sm
AM1/20-13R-Sm
AM1/30-13R-Sm
Table 2 – General technical characteristics of electric motors of AM0/R-Sm, AM1/R-Sm series
Supply voltage, V
Power frequency, Hz
Max. continuous operating time, min
Operating mode
Operating frequency of radio control, MHz
Radiocode
Max. number of recordable remote controls, pcs.
Protection rating
Protection class
Power cable length, m
Quantity of wires in cable
Wire section of cable, mm
Operating temperature range, °С
The product is intended for indoor use in a dry environment and is not intended for use in an acidic, salty or explosive
environment.
OPERATION MANUAL
Tubular electric motors of
AM0/R-Sm, AM1/R-Sm series
6 28
10 19
10 13
20 13
30 13
Parameter
2
Parameters
155
40
155
∞ 136
60 155
203
2
0.68 1.4 44
0.68 1.4 44
0.60 2.3 71.5
0.68 2.35 71.5
0.84 2.45 71.5
Value
230 (±10%)
50
4
S2
433.92
Dynamic
20
IP44
H
2
3
0.75
-20 ... +50
570
570
582
582
582