Signal And Power Cable - Cameo ZENIT W300i Bedienungsanleitung

SIGNAL AND POWER CABLE

There are no plugs or sockets at the cable ends of the DMX signal cable and the cable
for the spotlight's power supply. Therefore, the spotlight may only be wired by trained
specialist personnel. Extensive knowledge of handling data and power cables, as well
as the creation of waterproof connections and junctions according to protection class
IP67, is required.
If you do not have these qualifications, do not attempt to install cables yourself. Refer
instead to a qualified professional. Liability is excluded for damage resulting from
improper handling in all work steps necessary for safe operation.
Ensure that no mains voltage is present in cables and spotlights during all work steps
that are necessary for cabling.
DMX SIGNAL CABLE
DMX input and output
white
red
shield
red
white
POWER CABLE
Power cable
brown Phase (L)
yellow/green Grounding conductor
blue Neutral (N)
DMX IN minus (-)
DMX IN plus (+)
DMX IN/OUT
DMX OUT plus (+)
DMX OUT minus (-)
-
white
DMX IN
+
red
shield
DMX IN/OUT
+
red
DMX OUT
-
white
brown
yellow/green
blue
L
N
15