Cameo ZENIT W300i Bedienungsanleitung Seite 16

PLEASE NOTE
No display module connected to the spotlight:
• When the spotlight is supplied with mains voltage, the start-up process begins. During the start-
up process, the previously selected operating mode is activated and the spotlight is operational
after a short time.
Display module connected to the spotlight:
• When the spotlight is supplied with mains voltage, the start-up process begins and the following
are displayed in succession: "Welcome to Cameo", the model name and the software version.
During the start-up process, the previously selected operating mode is activated and the spot-
light is operational after a short time.
• Before changing device settings, ensure that the control panel is dry and free of dust in order
not to impair its functionality.
• If one of the DMX operating modes is activated and there is no DMX signal to the DMX input, the
currently programmed DMX address is displayed and the characters on the display will begin to
flash.
• The main display is activated automatically if there is no input for a period of approximately one
minute.
Fast Access Feature: In order to simplify the menu guide, the device has an intelligent menu struc-
ture that allows direct access to previously selected menu items and submenu items.
1. Press MODE and ENTER simultaneously for direct access to the last-edited submenu item,
where you can make changes instantly as required (DMX starting address and all modes).
2. Press MODE to go directly to the last selected and edited menu item. If you now repeatedly
press ENTER, you can access the submenu items to make individual settings (DMX start
address and all operating modes).
• The display can be rotated through 180° by pressing UP when the main display is visible.
• To quickly change a value (e.g. DMX start address), press and hold the UP or DOWN controls.
16