Startup / Operation - BOMANN KSG 7283 Bedienungsanleitung, Garantie

 Displace and fasten the door hinge (6) incl. foot
with the screws (7) accordingly. Screw in the sep-
arate foot (8).
 Return the unit to the upright position. Place the
appliance door on the hinge pin and fix it in the in-
tended position.
 Displace and fasten the upper door hinge (4) with
the screws (3) accordingly.
 Put the plastic rivet (1) in the exposed hole and
replace the hinge cover (2).
 Check that the door is aligned vertically and hori-
zontally to ensure proper opening and closing of
the door.

Startup / Operation

Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for approx. four hours before connecting to
the power supply. Nonobservance could lead to mal-
function of the cooling system and causes an appli-
ance breakdown.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter "Cleaning and Maintenance".
Starting the appliance
 Connect the appliance to the power supply.
 Operate the temperature control. See also the
section "Settings".
Settings
Setting [ 0 ] means that the appliance is in the off
state. Turn the temperature control clockwise, start-
ing from this setting; the appliance will turn on auto-
matically.
The power levels [ 1 – 7 ] regulates the different val-
ues of the internal temperature.
Setting 0 Setting 1
Off state Lowest setting
(warmest inside
temperature)
Note that the temperature will change depending on
the ambient temperature, frequency of door opening
and the appliance loading.
During initial operation, turn the temperature control
to the highest setting first, until the appliance has
reached the desired operating temperature. After-
wards it is recommended to turn the control back to a
medium setting; correcting the temperature at a later
point would then be easier.
Interior light
The indoor light is switched on or off via the on/off
switch.
Storing
The appliance is exclusively suitable for cooling and
storing drinks.
Several storage levels for inserting the grid shelves,
allows individual storage. Depending on require-
ments, the shelves can be (partially and depending
on model) adjusted in height or removed to optimize
the storage space.
Capacity / loading:
131 Cans à 330 ml (70 x 120 mm)
91 Bottles à 500 ml (70 x 170 mm)
131 x 330 ml
Store large bottles horizontally, with the opening
facing forward on the grid shelves.
18
Setting 7
Highest setting
(coldest inside
temperature)
91 x 500 ml