Herunterladen Inhalt Inhalt Diese Seite drucken

Startup / Operation - BOMANN GS 7232.1 Bedienungsanleitung, Garantie

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Reverse the door opening
If required, the door opening can be moved from the
right (supplied condition) to the left side.
WARNING:
When replacing the door stop, the appliance must be
disconnected from the power supply first.
NOTE:
 Ask another person to assist.
You possibly need:
driver as well as a thin-blade screwdriver.
 Loosen the screws on the appliance back and
remove the appliance cover.
 Dismount the upper door hinge and lift out the
appliance door.
 Move the hinge pin holder on the door top side
and the door stopper on the door underside and
set the appliance door safely aside.
 Tilt the appliance slightly backwards and block it
in this position. Unscrew the feet and disassemble
the lower door hinge.
 Transfer and attach the lower door hinge to the
opposite appliance side. Screw in the feet accord-
ingly.
screw wrench, Phillips screw-
 Put the appliance back in the upright position.
Put on the appliance door and fix it its intended
position.
 Transfer and attach the upper door hinge to the
opposite appliance side.
 Replace the appliance cover and fix it.
Check that the door is optimally aligned both vertical-
ly and horizontally to ensure a smooth opening and
closing of the door.

Startup / Operation

Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter "Cleaning and Maintenance".
Starting the appliance
 Connect the appliance to the power supply.
 Operate the temperature control with the help of
the included plastic plate. See also the section
"Settings".
Settings
The power levels [ 1 – 4 ] regulate the different val-
ues of the internal temperature.
Setting 1: Lowest setting (warmest inside temperature)
Setting 4: Highest setting (coldest inside temperature)
Note that the temperature will change depending on
the ambient temperature, frequency of door opening
and the amount of food in the appliance.
17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis