Startup / Operation - BOMANN GS 7325.1 Bedienungsanleitung, Garantie

• Remove the hinge cover and the blanking cap.
• Dismount the upper door hinge and lift out the
appliance door.
• Transfer the doorstop on the door underside.
Set the appliance door safely aside.
• Tilt the unit slightly backwards and lock it in this
position. Unscrew the feet and disassemble the
lower door hinge.
• Move and fasten the lower door hinge to the op-
posite appliance side. Screw in the feet accord-
ingly.
• Put the appliance back in the upright position.
Put on the appliance door and fix it in the intend-
ed position.
• Move and fasten the upper door hinge to the op-
posite appliance side after unscrewing the hinge
pin and inserting it from the other hinge side.
• Put on the hinge cover*
blanking cap.
• Dismount the door handle and attach it to the
corresponding other door outer side. Refer to the
"Assembling the door handle"
instructions in
Transfer the cover caps on the exposed holes to
the respective other door outer side.
Check that the door is optimally aligned both vertical-
ly and horizontally to ensure smooth opening and
closing of the door.
(delivery scope)
and the
.

Startup / Operation

Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
"Cleaning and Maintenance".
the chapter
Control overview
Function buttons
ALARM
TEMP°C
Super Freeze 3"
Function description
Temperature adjustment
By pressing the button TEMP°C several times, you
set the desired internal temperature in the range from
-14°C to -24°C.
The display shows the temperature selection.
23
stop alarm signal
set the inside temperature
activate / deactivate super
freeze function