Mounting The System Rail Extension; Setting The Air Filter Holder - Sartorius Maxicaps MR Betriebsanleitung

Installation
20 Maxicaps MR Operating Instructions
®
4.4

Mounting the System Rail Extension

Procedure
Loosen the wing nut (2) on the system rail extension.
t
Push the system rail extension (1) from above onto the stationary part of
t
1
the system rail (3).
To fasten the system rail extension: Tighten the wing nut (2) on the sys-
t
tem rail extension.
2
3
4.5

Setting the Air Filter Holder

The air filter clamp on the air filter holder must be rotated 90° once so that
the air filter can be fastened in the vertical position.
Procedure
Loosen the handle screw (1) on the air filter clamp.
t
Rotate the air filter clamp (2) by 90°.
t
Tighten the handle screw on the air filter clamp.
t
1
2