Installation; Selecting An Installation Site; Unpacking; Unpacking Trolley And Handles - Sartorius Maxicaps MR Betriebsanleitung

Installation

1
18 Maxicaps MR Operating Instructions
®
4 Installation
4.1

Selecting an Installation Site

Procedure
Ensure that the installation conditions have been met:
t
Condition
Ambient conditions
Setup surface
4.2

Unpacking

4.2.1

Unpacking Trolley and Handles

Requirements
Activate the two parking brakes on the castors.
Procedure
Remove the transport packaging.
t
Dispose of the transport packaging in accordance with local government
t
regulations.
4.2.2

Unpacking the Maxicaps

Personnel: 2 people (operators)
Procedure
Position the box so that the arrows (1) on the box are pointing upwards.
t
Open the box upwards.
t
Remove the cardboard protection.
t
Features
Suitability tested (see Chapter 12.4, page 44)
— Stable and even
— Low-vibration
— Sufficient space for the system (for device
space requirements, see Chapter 12.2,
page 43)
— Sufficient weight bearing capacity for the
system, including at full capacity (see
Chapter 12.1, page 42)

MR Filter Unit

®