BIOS Utility
Power Management
The Power Management menu lets you configure the system power-management feature.
The following screen shows the Power Management parameters and their default settings:
Power Management
Power Management Mode .............. [Enabled ]
IDE Hard Disk Standby Timer ...... [Off] Minute(s)
System Sleep Timer ............... [30] Minute(s)
Sleep Mode ..................... [Suspend ]
Power Switch < 4 Sec. ............... [Power Off ]
ACPI-BIOS Support
System Wake-Up Event
Modem Ring Indicator .............. [Disabled ]
↑↓ = Move Highlight Bar
Esc = Exit
Power Management Mode
This parameter allows you to reduce power consumption. When this parameter is set to Enabled,
you can configure the IDE hard disk and system timers. Setting it to Disabled deactivates the
power-management feature and its timers.
Power Switch < 4 sec
When set to Power Off, the system automatically turns off when the power switch is pressed. When
set to Suspend, the system enters the suspend mode.
System Wake-Up Event
This parameter lets you specify the activity that will resume the system to normal operation.
68 - English
Page 1/1
F1 = Help
→ ← = Change Setting,
[Enabled ]
Power Management
A26361-K535-Z120-1-7419