System Information - Acer V66XA Technisches Handbuch

BIOS Utility
The command line at the bottom of the menu tells you how to move within a screen and from one
screen to another.
²
To select an option, move the highlight bar by pressing
>3J'Q@
>3J'Q@
²
Press to move to the next page or
²
To change a parameter setting, press
>(VF@ >(VF@
²
Press to return to the main menu. If you are already in the main menu, press
to exit Setup.
The parameters on the screens show default values. These values may not be the same as those
in your system.
The grayed items on the screens have fixed settings and are not user-configurable.

System Information

The following screen appears if you select System Information from the main menu.
System Information
Processor .......................... Pentium II
Processor Speed .................... 333 MHz
Internal Cache Size ................ 32 KB, Enabled
External Cache Size ................ 512 KB, Enabled
Floppy Drive A ..................... 1.44 MB, 3.5-inch
Floppy Drive B ..................... None
+IDE Primary Channel Master ......... Hard Disk, 8063 MB
+IDE Primary Channel Slave .......... None
+IDE Secondary Channel Master ....... None
IDE Secondary Channel Slave ........ IDE CD-ROM
Total Memory ....................... xx MB
1st Bank ......................... SDRAM, 64 MB
+2nd Bank ......................... None
+3rd Bank ......................... None
PgDn/PgUp = Move Screen, Esc = Back to Main Menu
The System Information menu shows the current basic configuration of your system.
62 - English
À
>3J8S@
>3J8S@
¿ Á to return to the previous page.
or key until the desired setting is found.
System Information
Â
or then press Enter.
Page 1/2
A26361-K535-Z120-1-7419
>(VF@ >(VF@
again