Onboard Device Settings - Acer V66XA Technisches Handbuch

Onboard Peripherals

Onboard Device Settings

This option is available only when you are in the Advanced Level.
i
The Onboard Device Settings menu allows you to configure the device controllers available
onboard. Selecting this option from the Onboard Peripherals menu displays the following screen:
Onboard Device Settings
*Floppy Disk Controller............. [Enabled ]
*IDE Controller..................... [Both ]
*PS/2 Mouse Controller.............. [Enabled ]
*USB Host Controller................ [Enabled ]
*USB Legacy Mode.................. [Disabled]
* Onboard VGA....................... [Enabled ]
* Onboard Audio Chip................ [Enabled]
↑↓ = Move Highlight Bar
Esc = Exit
USB Host Controller
This parameter lets you enable or disable the USB controller on board. When enabled, it activates
the USB function of the system. When disabled, it deactivates the function.
USB Legacy Mode
This function, when enabled, lets you use a USB keyboard in a DOS environment. Set this to
Disabled to deactivate the USB keyboard function in DOS environment. This parameter is
configurable only if the USB Host Controller parameter is enabled.
Onboard VGA
This parameter lets you enable or disable the onboard video controller. If you installed a video card
into your system, you must disable this parameter for the card to work properly.
Onboard Audio Chip
This parameter lets you enable or disable the audio controller on board. Set this parameter to
Disabled if you have installed an audio card into your system. Otherwise, your audio card will not
function.
A26361-K535-Z120-1-7419
F1 = Help
→ ← = Change Setting,
BIOS Utility
Page 1/1
English - 67