Residual Risk Factors - Holzmann BSG 13E Originalbetriebsanleitung

 The drill bit sharpening device is not suitable for continuous use. If the engine is too
hot, it switches from thermally conditioned. The device is switched off, let them
cool.
 When it comes to grinding sparks. Hold the drill sharpener at a safe distance from
flammable liquids and materials.
 Avoid touching the grinding stone and the workpiece immediately after use because
they are very hot.
 The workpiece during grinding turns blue, it may overheat and suffer damage. Cool
the workpiece during grinding, optionally in regular water.
 The drill sharpener is designed for dry grinding and may come in contact with any
liquids.
The machine does not require extensive maintenance.
Repairing shall be performed by trained professionals only.
Accesories: Use only accesories recommended by HOLZMANN-Maschinen and its
11.4

Residual risk factors

Even if the machine is used as required it is still impossible to eliminate certain residual risk
factors totally. The following hazards may arise in connection with the machine´s construction
and design:
 Hearing, unless arrangements have been made by the user for hearing protection.
These risks can be minimized if all safety rules are applied, the machine is properly maintained
and serviced the machine as intended and is serviced by a trained service professional.
Despite all the safety devices and remains her good common sense and your appropriate technical
qualification / training on the operation of a machine such as the BSG 13E of the most important
safety factor!
HOLZMANN MASCHINEN GmbH
Elektrisches Bohrerschärfgerät/Electric drill bit sharpener/Bruska vrtáků/Brúska vrtákov/Afiladora de brocas/Affûteuse de forets
sales partners.
www.holzmann-maschinen.at
SAFETY
Seite 23
BSG 13E