KKT KOLBE EB8016ED Benutzerhandbuch Seite 49

Installation and connection of the appliance
What to do in case of problems?
Warning - Risk of electric shock!
Incorrect repairs are dangerous!
Repairs and the replacement of a damaged power cable
may only be carried out by a certified electrician.
If the appliance is defective, unplug the appliance from
the mains or switch off the circuit breaker in the fuse box.
Contact a certified electrician or the customer service.
The oven doesn't heat up.
• Has the fuse in the domestic installation been triggered?
• Have the temperature and heating mode been set correctly?
The device fuse keeps blowing.
• Contact the customer service or a licensed electrician.
The Lighting has failed.
• To replace the lighting, see corresponding chapter.
The cooking result is not satisfactory.
• Have the recipe instructions correctly been followed and
have the application guidelines in this manual been folloed?
Power connection
!
Before connecting, check if the voltage indicated on the
type plate corresponds to the mains voltage. The length of
the connection cable must be sized so that the device can
be connected prior to insertion. The protective conductor
must be sized so that it is loaded onto train at the strain
relief fails after the live wires of the connection cable.
KKT KOLBE customer service
Tel. 0049 9502 667930
Mail: info@kolbe.de
www: www.kolbe.de
→ You can find further data and
documents on our website under
„Questions & Answers".
N
L
49