probst STS-43-EH-23 Betriebsanleitung Seite 36

Operation
❷
ATTENTION: Keep fingers away from the splitting blades during the splitting process.
Otherwise there is a risk of injury/ and shearing off of the fingers!
❷
51200081
Switch on the control unit. To do this, move
the battery switch
(down). Start the splitting process by pressing
the button
The button must be pressed until the splitting
❸
process is finished (as soon as the button is
released, the upper blade returns to its
original position).
It is recommended to switch off the control
unit at the end of work. To do this, move the
battery switch
To protect against unintentional use of the
unit by third parties, remove the battery switch
❷.
It is also recommended to remove the battery
❹
box and store it in a safe place. To do
❺
this, pull the power plug
pull the battery box
handle).
11 / 16
❷
to the vertical position
❸.
❷
to the horizontal position.
❺
downwards and
❹
upwards (by the
GB