Panasonic EY7960X Bedienungsanleitung Seite 6

Symbol
V
n
o
Revolutions or reciprocations
-1
...min
Electrical capacity of battery
Ah
Rotation with hammering
To reduce the risk of
injury, user must read and
understand instruction
For indoor use only.
WARNING:
Do not use other than the Panasonic
●
battery packs that are designed for use
with this rechargeable tool.
Panasonic is not responsible for any
●
damage or accident caused by the use
of the recycled battery pack and the
counterfeit battery pack.
Do not dispose of the battery pack in a
●
fire, or expose it to excessive heat.
Do not drive the likes of nails into the
●
battery pack, subject it to shocks,
dismantle it, or attempt to modify it.
Do not allow metal objects to touch the
●
battery pack terminals.
Do not carry or store the battery pack
●
in the same container as nails or similar
metal objects.
Do not charge the battery pack in a
●
high-temperature location, such as next
to a fire or in direct sunlight. Otherwise,
the battery may overheat, catch fire, or
explode.
EY7460_EY7960_Book.indb 6
Meaning
Volts
Direct current
No load speed
per minutes
pack
Forward rotation
Reverse rotation
Rotation only
manual.
Never use other than the dedicated
●
charger to charge the battery pack.
Otherwise, the battery may leak,
overheat, or explode.
After removing the battery pack from
●
the tool or the charger, always reattach
the pack cover. Otherwise, the battery
contacts could be shorted, leading to a
risk of fire.
W h e n t h e B a t t e r y P a c k H a s
●
Deteriorated, Replace It with a New
One.
Continued use of a damaged battery
pack may result in heat generation,
ignition or battery rupture.
III. ASSEMBLY
Attaching or Removing Bit
NOTE:
When attaching or removing a bit,
disconnect battery pack from tool or
place the switch in the center position
(switch lock).
This tool is equipped with a keyless drill
chuck.
1. Attachment
Insert the bit and turn the lock collar
clockwise (looking from the front) to
tighten firmly until it stops clicking.
2. Removal
Turn the lock collar counterclockwise
(looking from the front), then remove
the bit.
- 6 -
Lock collar
2013-12-2 16:12:16