Tools Require; Delivery Scope - Mobitronic Rv-700 Montage- Und Bedienungsanleitung

The following tools are required for installation and assembly:
– Scale
– Centre punch
– Hammer
– Bits
The following tools are required for the electrical connection and
testing:
– Diode test lamp (see ✎ B 8)
or voltmeter
– Crimping pliers (see ✎ B 10)
– Insulation tape
You may need other screws, nuts, washers, tapping screws and binders
for fastening the camera and monitor than those contained in the delivery
scope depending upon the individual installation.
No. Quantity
1 1
1.1 1
1.2 1
1.3 1
1.4 1
1.5 1
3 1
3.1 1
3.2 1
3.3 1
3.4 1
36
Tools required
(see ✎ B 1) – Drill
(see ✎ B 2) – Screwdriver
(see ✎ B 3) – Spanner / wrench
(see ✎ B 4)
– Thermal shrinking hose
(see ✎B 9) – Hot-air dryer
– Soldering bit
(see ✎ B 11) – Tin-lead solder

Delivery scope

Designation
Monitor kit (see ✎ C)
Monitor RV-58
Monitor stand
Set of connection cables
Power cable with cigarette lighter socket
IR remote control
Camera kit
Camera RV-27 alternatively
Camera holder
Sun-hood
Connection cable 20 m RV-520
(see ✎ B 5)
(see ✎ B 6)
(see ✎ B 7)
(see ✎ B 12)
(see ✎ B 13)
(see ✎ B 14)