Operating positions
Fig. B:
Attention!
Before operating the appliance, attach the
tool / accessory to the correct drive and
in the correct position and place in the
operating position according to this table.
The swivel arm must be engaged in every
operating position.
Note
The swivel arm features an "Easy Armlift"
function which supports the upwards
movement of the swivel arm.
Selecting the operating position:
■ Press the Release button and move the
swivel arm. Support movement with your
hand.
■ Move the swivel arm until it engages in the
required position.
Drive
Position
1
7
2
7
3
6
9
4
7
* Insert / remove whisk, stirrer or kneading
hook. Add large quantities of ingredients.
Tool /
Operating
Accessory
speed
15
17
13
*
–
37
35
57
57
Operating positions
Operation
W Risk of injury!
Do not insert mains plug until all preparations
for working with the appliance are complete.
Attention!
Do not operate the appliance without an
accessory/tool in the operating position.
Do not operate the appliance empty. Do not
expose appliance or accessories to heat
sources. Parts are not microwavesafe.
■ Before operating the appliance and
accessories for the first time, clean
thoroughly; see "Cleaning and servicing".
Important information
These operating instructions contain a sticker
with reference values for the operating speed
of the appliance when using the tools or
accessories. We recommend attaching this
sticker to the appliance (Fig. C).
Preparation
■ Place the base unit on a smooth, clean
surface.
■ Pull out the cord in one go to the required
length (max. 100 cm) and slowly release;
the cord is locked (Fig. D).
■ Reducing the cord length:
Pull gently on the cord and allow it to roll up
to the required length. Then gently pull the
cord again and slowly release; the cable is
locked.
Warning!
Do not twist the cord when inserting it. If the
appliance features an automatic cord winder,
do not insert the cord manually. If the cord
jams, pull out the cord all the way and then
allow it to wind up.
■ Insert the mains plug.
en
21