Predetermined Breaking Point; Operating The Appliance - Bosch MUZ6MM Serie Gebrauchsanleitung

en Overview
Overview
X Fig. A
a Pusher
b Cover with filling shaft
c Bowl
d Drive base
e Universal blade
f Disc holder
g Reversible slicing disc (thick / thin)
h Reversible shredding disc (coarse / fine)
i Grating disc
Predetermined
breaking point
If an overload occurs, the disc holder on the
drive shaft breaks, thereby protecting the
drive from damage.
Spare part available from customer service.

Operating the appliance

Important information:
Only when the multi­blender has been
completely assembled and the cover
rotated as far as the cover lug, can the
multi­blender be attached to the food
processor and operated. If required, hold
down the cover lug with your thumb.
If using the blender drive of the food
processor, place the protective cover on the
unused drive for the bowl (Fig. B-3).
■ Thoroughly clean accessories before
using for the first time, see "Cleaning
and servicing".
Universal blade
For mincing, puréeing, blending, cutting and
for making sauces and mixed drinks.
W Risk of injury from sharp blades!
To insert and remove the universal blade,
take hold of it by the tapered lug only.
X Fig. B
■ Place the bowl on the base and
rotate all the way in an anti­clockwise
direction. Lug (1.) must engage in the
slot (2.) on the handle (Fig. B-4).
10
■ Insert the universal blade, taking hold of
it by the tapered lug.
■ Add food to be processed.
■ Attach cover (note mark) and rotate in
an anti­clockwise direction as far as the
cover lug (1.). Cover lug must engage in
the slot (2.) on the handle (Fig. B-7).
■ Place multi­blender on the drive, paying
attention to the mark. Rotate the bowl
as far as possible in an anti­clockwise
direction.
■ Set the rotary switch to the desired
setting.
■ More food can be added through
the filling shaft while the appliance is
running.
Note: The cover cannot be removed while
the applicance is running and if the multi­
blender is attached to the food processor.
After using the appliance
■ Switch off the appliance with the
rotary switch.
■ Pull out the mains plug.
■ Rotate multi­blender in a clockwise
direction and remove from the
appliance.
■ Remove the cover by rotating it in
a clockwise direction.
■ Empty multi­blender. To do so, hold
back the universal blade by the tapered
lug in the multi­blender.
■ Remove the universal blade from
the tapered lug.
■ Rotate the bowl in a clockwise direction
and remove from the drive base.
■ Clean parts.