Open Source Software - Stihl RMI 422 P Gebrauchsanleitung

Mowing area with external docking
station (1)
Docking station:
Location (1) next to the garage B and
behind the house A.
Wire clearances: ( 12.5)
Clearance to the edge: 28 cm
Clearance to adjoining area that can be
travelled on (e.g. patio) with a stepped
area height of less than +/- 1 cm: 0 cm
Clearance to the pond: 100 cm
Guide loops:
Installation of two guide loops (2) for using
the offset drive home function. (
Minimum distance from the corridor
entrance: 2 m
Note the minimum clearance to corners.
( 12.12)
0478 131 9963 F - EN
Programming:
Define the size of the mowing area and
program at least one starting point outside
the corridor to the docking
station.( 11.14)
Points to note:
Installation of a corridor (4) with funnel-
shaped entrance area (3). (
Wire clearance: 22 cm
The corridor (4) leads to the external
docking station (1). Increase the wire
clearance in the corridor to the width of the
ground plate (5) one metre in front of the
docking station. (
11.13)
Note the space requirement in the corridor
and beside the docking station.

28. Open source software

This product contains proprietary open
source software published by the
respective authors under specific license
conditions, such as the "GNU General
12.11)
Public License" (GPL), the "GNU Lesser
General Public License" (LGPL), the
"Apache License" or similar. Copyright
notices, terms of use or license provisions
contained in this instruction manual that
contradict an applicable open source
license shall not apply. The use and
9.9)
distribution of the open source software
contained in the product is subject
exclusively to the respective open source
license. If the applicable license grants you
the right to the source code for this
189