Changing The Base Station Pin Code - AUDIOLINE DECT 3000micro Bedienungsanleitung

AUDIOLINE DECT 3000micro
8.4

CHANGING THE BASE STATION PIN CODE

The base station PIN code is required for resetting all base station settings. PIN
code "1 5 9 0" is preset in the factory.
PLEASE FOLLOW THE INSTRUCTIONS:
Press the button as often as necessary until the
message "BASE SETTING" appears in the display.
Confirm the selection with
Press the button as often as necessary until the
message "B-CHANGE PIN" appears in the display.
Confirm the selection with
Now enter the PIN code for the base station (factory
setting 1 5 9 0).
Warning! If the PIN code is entered incorrectly
you will hear several signal tones and you will be
able to repeat the procedure twice more.
Confirm the selection with
Now enter the new PIN code for the base station
Confirm the selection with
Now enter the new PIN code once more as a
precaution.
Confirm the selection with
You can return to the main menu by holding the
button.
If you want to exit programming, please press the
button twice for one second.
BASE STATION SETTINGS
.
.
.
.
.
Display shows:
BASE SETTING
WAITING =>
SETTING DIAL
B-CHANGE PIN
FP PIN :
FP PIN : ****
WAIT => NEW
PIN1
NEW PIN: ****
RETYPE :
RETYPE : ****
B-CHANGE PIN
User name
e.g. Multi 1
User name
e.g. Multi 1
77