Resetting The Base Station (Reset) - AUDIOLINE DECT 3000micro Bedienungsanleitung

BASE STATION SETTINGS
8.5

RESETTING THE BASE STATION (RESET)

With this function, the base station can be reset to the default settings. Two
different alternatives are available:
Initialise = The "Initialise" function reinstates the standard settings for the base
station.
Base ringing tone melody = 4
Dialling mode = TTD
Call barring = none
Reset All = All handsets are logged off from the base station and must be logged
on again.
PLEASE FOLLOW THE INSTRUCTIONS:
Press the button as often as necessary until the
message "BASE SETTING" appears in the display.
Confirm the selection with
Press the button as often as necessary until the
message "BASE RESET" appears in the display.
Confirm the selection with
Now enter the PIN code for the base station (factory
setting 1 5 9 0).
Confirm the selection with
Choose whether you want to carry out a "Reset All" or
"Initialise" by repeatedly pressing the
Confirm the selection with
The display jumps back to the message "Base- Reset"
and the reset or initialisation has been carried out.
You can return to the main menu by holding the
button.
If you want to exit programming, please press the
button twice for one second.
78
AUDIOLINE DECT 3000micro
Base ringing tone volume = 9
Flash/Earth = Flash
.
.
.
button.
.
Display shows:
BASE SETTING
WAITING =>
SETTING DIAL
BASE RESET
FP PIN :
FP PIN : ****
RESET ALL
RESET ALL or
INITIALISE
BASE RESET
User name
e.g. Multi 1
User name
e.g. Multi 1