PRIVATE EXCHANGES/T-NET
6.
T-NET OPERATION / PRIVATE EXCHANGES
You can use the "R" signal button on your telephone on private exchanges and
when using DEUTSCHE TELEKOM's T-Net functions.
6.1
"R" BUTTON ON PRIVATE EXCHANGES
If you have connected your AUDIOLINE DECT 3000micro to a private exchange,
you can use all the facilities such as call transfer, automatic recall, etc. The "R"
signal button gives you access to these facilities. The FLASH time "100ms" will be
required on a private exchange. (Adjustment, see 6.3). You can find out from the
dealer from whom the equipment was purchased whether your telephone will
work on your private exchange without any problems.
6.2
"R" BUTTON AND THE DEUTSCHE TELEKOM T-NET
Your AUDIOLINE telephone supports the most important DEUTSCHE TELEKOM
added value functions (e.g. brokering, call waiting, three-way conference, etc.).
The T-Net works using the "FLASH 300ms" setting (adjustment, see 6.3). Please
contact DEUTSCHE TELEKOM to gain access to T-Net functions.
6.3
SETTING THE FLASH TIME
PLEASE FOLLOW THE INSTRUCTIONS:
Press the
button as often as necessary until the
message "BASE SETTING" appears in the display.
Confirm the selection with
Press the
button as often as necessary until the
message "FLASH TIME" appears in the display.
Confirm the selection with
current setting FLASH or EARTH in the display.
Select the mode required, FLASH or EARTH, by
pressing the
Confirm the selection with
current setting of the FLASH or EARTH time in the
display.
64
button repeatedly.
AUDIOLINE DECT 3000micro
.
and you will see the
and you will see the
Display shows:
BASE SETTING
WAITING =>
SETTING DIAL
FLASH TIME
FLASH or EARTH
FLASH or EARTH
e.g. FLASH 0300