Changing The Pin Code For The Handset; Display The Rfpi Number - AUDIOLINE DECT 3000micro Bedienungsanleitung

HANDSET SETTINGS
7.6

CHANGING THE PIN CODE FOR THE HANDSET

Some functions on the handset are protected by a PIN code so that only
authorised persons can switch these functions on or off. The factory setting for
the PIN code is "1 5 9 0".
PLEASE FOLLOW THE INSTRUCTIONS:
Press the button as often as necessary until the
message "H-CHANGE PIN" appears in the display.
Confirm the selection with
Now enter the handset PIN code
(factory setting 1 5 9 0).
Confirm the selection with
Now enter the new PIN code for the handset.
Confirm the selection with
Now enter the new PIN code once more as a
precaution.
Confirm the selection with
You can return to the main menu by holding the
button.
If you want to exit programming, please press the
button twice for one second.
7.7

DISPLAY THE RFPI NUMBER

Each handset has its own RFPI number. This RFPI number is sometimes
required when you wish to log your handset onto a remote base station.
PLEASE FOLLOW THE INSTRUCTIONS:
Press the button as often as necessary until the
message "SHOW RFPI" appears in the display.
Confirm the selection with
After a few seconds, the telephone automatically
returns to display the main menu.
72
AUDIOLINE DECT 3000micro
.
.
.
.
.
Display shows:
H-CHANGE PIN
PP PIN :
PP PIN :****
NEW PIN:
NEW PIN: ****
RETYPE :
RETYPE : ****
H-CHANGE PIN
User name
e.g. Multi 1
User name
e.g. Multi 1
Display shows:
SHOW RFPI
XXXX-Number
User name
e.g. Multi 1