Section Run Time; Setpoint Values 1 And 2; Control Contacts - JUMO B 703571.7 Kurzanleitung

Step Activity
4 Save the setup file and transfer the setup data to the device
5 If a green icon (smiley) appears, then the programs have been successfully transferred.
➥ Two program curves are now saved in the device and can be started at any section at an
adjustable time and run in parallel.
9.1.3

Section run time

The period of time between sections.
Setpoint values varying from section to section create a ramp-like setpoint curve (with a nega-
tive or positive slope).
9.1.4

Setpoint values 1 and 2

Each program contains 2 setpoint value profiles which can be used to create 2 program con-
trollers.
9.1.5

Control contacts

Eight control contacts can be set at any one time. They are available in the digital selector and
can switch on relays, for instance.
 Setup program:
C
ONFIGURATION LEVEL
They can also be logically linked or can initiate internal device functions.
All manuals and user guides at all-guides.com
> D
IGITAL OUTPUTS
9 Program administration
45