Cleaning And Maintenance - Concept SM 3390 Bedienungsanleitung

EN
Recommended amount of food and preparation times
Food
Meat (1 cm pieces)
Cheese (1 cm pieces)
Nuts
Herbs
Onions
Garlic
Carrots (1 cm pieces)
Hard-boiled eggs
Bread (1 cm pieces)
MILLING
1. Put food in the mill container (5), do not exceed the marked maximum level, and close it by screwing in
the mill blade part (6).
2. Put the mill container (5) on the body of the blender (1) so the latches on the container (5) fall into the
holes on the body of the blender (1) and turn the container of the blender (2) clockwise until an audible
click is heard.
3. Unroll the entire power cord and insert the plug into the mains.
4. Press and hold the PULSE button to start blending. Release the PULSE button to stop blending.
5. After the grinding process sis done, unplug the power cord from the mains.
6. Remove the mill container (5) from the body of the appliance (1).

CLEANING AND MAINTENANCE

Prior to any cleaning or change of the extensions, make sure the power cord is disconnected from the socket.
• Never immerse the motor part (1) or the power cord in water.
• Wipe the body of the unit (1) using a wet cloth only.
• Wash the replaceable parts in tepid water with detergent and rinse in clean water. Do not use pot scourers,
abrasive agents or solvents to clean the appliance.
SERVICING
Any extensive maintenance or repair that requires access to the inner parts of the product must be performed
by an expert service centre.
42
Maximum quantity
200 g
200 g
200 g
40 g
200 g
40 g
200 g
2 eggs
1 slice
Approximate cutting time
15 s
15 s
15 s
10 s
15 s
10 s
15 s
15 s
15 s
SM 3390