Safe End Position - GF SPC D/PID Bedienungsanleitung

Operating Instructions
Analog position indicator
Digital outputs
Digital input
For UL approved components, only circuits of limited power according to „NEC Class 2" may be used.
3.5

Safe end position

Drive type Designation
Single-acting
Control function A
up
down
Single-acting
Control function B
up
down
Maximum Cur- 10 mA (for voltage output 0 to 5/10 V)
rent
Burden (load) 0 - 560 Ω (for current output 0/4 - 20 mA)
Galvanically isolated, PNP
Current limit: 100 mA, output is clocked on overload
PNP
0 - 5 V = log "0", 10 - 30 V = log "1"
Inverted input correspondingly inverted (input current < 6 mA)
Safety end positions
after failure of the
auxiliary power
Electrical
FC
FO
Type SPC D/PID positioner
15