Pin Assignment - GF SPC D/PID Bedienungsanleitung

Type SPC D/PID positioner
4.3.1 Circular connector
1) X1 - Round plug M12, 8-pin
Pin Assignment
Input signals from the control station (e.g., PLC)
1 Digital input +
7 Setpoint value GND
8 Setpoint value + (0/4 - 20 mA/0 - 5/10V)
Output signals to the control station (e.g. PLC)
- Only required with analog output and/or digital output option
2 Not connected
3 Not connected
4 Not connected
5 Analog position feedback GND
6 Analog position feedback +
22
4
2
1 3
No. Designation
1 X1 - Round plug M12, 8-pin
Input signals from the control station
Output signals of the control station
(optional)
2 X5 - Round plug M8, 4-pin (only type SPC
PID)
Input signals Process actual value
3 X6 - Round plug M12, 4-pin
(Supply voltage)
4 Slide switch
3
4
5
6
Operating Instructions
2
1
8
7