Function Of The Buttons - GF SPC D/PID Bedienungsanleitung

Operating Instructions
6.2

Function of the buttons

The function of the 4 buttons in the control panel vary depending on the operating mode (AUTOMATIC or MANUAL) and the operating
level (process level
or setting level).
The function of the buttons is displayed in the gray text box located above the button.
Function of the buttons in the process level
Button Function of
the buttons
OPN
CLS
MENU
AUTO
MANUAL
Function of the buttons in the setting level
Button Function of
the buttons
+
-
<--
EXIT
ESC
STOP
ENTER
SELEC
OK
INPUT
EXIT
RUN
STOP
Function description
Manual opening of the actuator
Change of the displayed value (e.g. POS-CMD-TEMP-...)
Manual closing of the actuator
Change of the displayed value (e.g. POS-CMD-TEMP-...)
Change to the setting level Note: Press the button for approx. 3 s.
Return to AUTOMATIC operating mode
Change to MANUAL operating state
Function description
Scroll up in the menus
Increase numerical values
Scroll down in the menus
Decrease numerical values
Move one position to the left;
when entering numerical values
Return to the process level
Step by step return from a sub-menu item
Exiting a menu
Aborting a procedure
Selecting, activating or deactivating a menu item
Step by step return from a sub-menu item
Starting a procedure
Aborting a procedure
Type SPC D/PID positioner
MANUAL
AUTOMATIC
MANUAL
AUTOMATIC or
MANUAL
MANUAL
AUTOMATIC
31