Inhaltsverzeichnis
Werbung
17
Technical Information
Soft Start
Soft Start
To start the pump after a protracted stop of the TwisTorr 404 FS, it's
recommended to enable the "Soft Start" function; this allows a better
grease distribution in the bearings.
The "Soft Start" mode is disabled by default.
NOTE
To enable the "Soft Start" mode it must be activated by the suitable
software or Remote I/O command (see Controller Manual).
"Soft Start" frequency steps are the following: 200 Hz, 300 Hz, 680 Hz,
714 Hz, 825 Hz (for more details see Controller Manual).
292/328
TwisTorr 404 FS User Manual / 87-901-048-01
Werbung
Inhaltsverzeichnis
