Inhaltsverzeichnis
Werbung
17
Technical Information
Soft Start
Soft Start
To start the pump after a protracted stop of the TwisTorr 804 FS, it's
recommended to enable the "Soft Start" function; this allows a better
grease distribution in the bearings.
The "Soft Start" mode is disabled by default.
NOTE
The "Soft Start" mode must be activated by the suitable software or
Remote I/O command (see Controller Manual).
"Soft Start" frequency steps are the following: 200 Hz, 300 Hz, 680 Hz,
714 Hz, 825 Hz (for more details see Controller Manual).
308/344
TwisTorr 804 FS User Manual / 87-901-052-01
Werbung
Inhaltsverzeichnis
