Package Contents; Product Description - Niceboy Raze Supersonic Bedienungsanleitung

EN

PACKAGE CONTENTS

Niceboy RAZE Supersonic wireless speaker
USB-C charging cable
Audio cable
Instruction manual

PRODUCT DESCRIPTION

1. Volume down / previous track button
2. Volume up / next track button
3. Control of lights
4. On / Off Play / Pause
5. TWS button / Change mode / Accept / End / Reject call
6. AUX input jack 3.5mm
7. Charging USB - output, input for USB flash drive
8. Input for micro SD card
9. Charging USB-C input
10. Operating LED
CHARGING
We recommend fully charging the speaker before first use
to maximize battery life. A full charge takes approximately
3 hours. A low battery status will be signaled by an acoustic
signal. To charge the speaker's battery, connect the supplied
USB-C cable to the charging port (9) and connect to any
charging adapter (voltage 5V and output current at least 1A)
or to USB in the PC. The charging progress is signaled by the
red charging LED (10), after full charging the LED goes out.
ON/OFF
To turn the speaker on or off, press and hold the button
(4) for 3 seconds.
If the speaker is not active, it will automatically turn off after 15 minutes to save energy.
2
1
6
7
8
9
10
10
3
4
5