Inhaltsverzeichnis
Werbung
FRONT WHEEL AND FRONT BRAKE
ASSEMBLY AND INSTALLATION
Brake shoe plate assembly
1. Install:
Brake camshaft 1
NOTE:
Apply the lithium soap base grease on the
brake camshaft.
2. Check:
Brake camshaft operation
Unsmooth operation → Repair.
3. Install:
Wear indicator plate 1
NOTE:
When installing the wear indicator plate to the
brake camshaft align the projection a on the
wear indicator plate with the slots b on the
brake camshaft.
4. Install:
Brake camshaft lever 1
NOTE:
Install the brake camshaft lever so that the
angle b between a line drawn, through the
hub of the brake shoe and dot a , and a line
drawn through the midline of the camshaft and
dot a is 84˚.
5. Install:
Springs 1
Brake shoes 2
NOTE:
Apply the lithium soap base grease on the
pivot pin.
WARNING
Do not apply grease to the brake shoe lin-
ings.
5 - 5
CHAS
10 Nm (1.0 m · kg, 7.2 ft · lb)
New
Werbung
Inhaltsverzeichnis
