Inhaltsverzeichnis
Werbung
Å
ı
IGNITION SYSTEM
SPARK GAP TEST
1. Disconnect the spark plug cap from spark
plug.
2. Connect the dynamic spark tester 1
(ignition checker 2) as shown.
Spark plug cap 3
Spark plug 4
Å For USA and CDN
ı Except for USA and CDN
3. Kick the kickstarter crank.
4. Check the ignition spark gap.
5. Start engine, and increase spark gap
until misfire occurs. (for USA and CDN
only)
Minimum spark gap:
6.0 mm (0.24 in)
EC624000
COUPLERS AND LEADS CONNECTION
INSPECTION
1. Check:
Couplers and leads connection
Rust/dust/looseness/short-circuit →
Repair or replace.
ENGINE STOP SWITCH INSPECTION
1. Inspect:
Engine stop switch conduct.
Tester (+) lead → Black/White lead 1
Tester (–) lead → Black lead 2
PUSH IN
FREE
Not continuous while being pushed →
Replace.
Continuous while being freed → Replace.
6 - 3
–
ELEC
Tester selec-
B/W
B
tor position
1
2
Ω × 1
+
Werbung
Inhaltsverzeichnis
