Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
(24) Parallel guide
(25) Scale for rebate width
(26) Locking nut for rebate width setting
(27) Fastening screw for parallel guide
(28) Extraction hose (dia. 35 mm)
a)
(29) Chip/dust bag
(30) Fastening screw for rebate depth guide
a)
(31) Rebate depth guide
(32) Parking rest
(33) Drive belt
(34) Large belt wheel
(35) Small belt wheel
(36) Handle (insulated gripping surface)
(37) Adapter for converting from HSS to TC planer
a)
blades
(38) Battery charge indicator on the power tool
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Planer
Article number
Rated voltage
A)
No-load speed
Cutting depth
Rebate depth
Max. planing width
Weight according to EPTA-Pro-
B)
cedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperature
C)
during operation
and during
storage
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery GBA 18V
4.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Values can vary depending upon the product and are subject to ap-
plication and environmental conditions. For further information
www.bosch-professional.com/wac.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-14.
Bosch Power Tools
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 91 dB(A); sound power level
99 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
a)
determined according to EN 62841-2-14:
a
= 3.5 m/s
h
a)
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ac-
cessories or is poorly maintained, the vibration level and
noise emission value may differ. This may significantly in-
crease the vibration and noise emissions over the total work-
ing period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
GHO 185-LI
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
3 601 EB5 0..
power tool and accessories, keeping their hands warm, and
V
18
organising workflows correctly.
–1
min
14,000
mm
0–2.6
Rechargeable battery
mm
0–9
Bosch sells some cordless power tools without a re-
mm
82
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
kg
2.6–3.7
aging.
°C
0 to +35
Charging the battery
u
°C
–20 to +50
Note: Lithium-ion rechargeable batteries are supplied par-
GBA 18V...
tially charged according to international transport regula-
ProCORE18V...
tions. To ensure full rechargeable battery capacity, fully
GAL 18...
charge the rechargeable battery before using your tool for
GAX 18...
the first time.
GAL 36...
Inserting the Battery
Push the charged battery into the battery holder until it
clicks into place.
Removing the Battery
To remove the rechargeable battery, press the battery re-
lease button and pull the battery out. Do not use force to do
this.
The rechargeable battery has two locking levels to prevent
the battery from falling out if the battery release button is
(triax vector sum) and uncertainty K
h
2
2
, K = 1.5 m/s
.
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
1 609 92A 8GN | (16.05.2023)
English | 19
Werbung
Inhaltsverzeichnis
