How To Use - Panasonic EW1614 Bedienungsanleitung

How to use

Place the main unit on a flat and stable
Prepare
surface.
1
Insert the power plug into a household outlet,
and fill the water tank with water.
a Insert the power plug
into a household
outlet.
• The cord can be
pulled out from either
the right or the left.
b Open the water tank
cap.
c Remove the water
tank, and fill it with
water.
• When filling water, be
sure not to exceed the
upper water level limit.
d Set the tank to the
main unit firmly.
e Attach the water tank
cap.
Upper water
level limit
❷
❺
❸
❹
❶
2
Install the nozzle, and turn on the power.
a Install the nozzle.
• Choose a nozzle for
your purpose. ( See pages
13 and 14. )
b Ensure the Stop/Jet
switch is set to " "
(stop mode).
c Press the power switch
" " to turn on the
power.
• The water pressure level
LED indicator lights on.
• The power will be cut off
after about 10 minutes to
avoid forgetting to turn off.
(The function for avoiding
forgetting to turn off.)
3
Press the water pressure
regulator switch to select
the water pressure level.
a With the nozzle facing
the basin, set the
Stop/Jet switch to
" " (jet mode) to
jet water.
Press in firmly until a
"click" is heard.
b c
a
Click
Press
Press
Stop/Jet switch
11