Charging - Silvercrest SAS 7.4 LI E4 Bedienungsanleitung

Charging

NOTE
► Check to ensure that the on/off switch
position 0) before starting the charging process.
■ Place the handheld vacuum cleaner from above into the wall bracket
that the barrel plug
handheld vacuum cleaner. The charge indicator lamp
charging process begins.
■ Important: The charge indicator lamp
handheld vacuum cleaner is charged enough to vacuum again. This does
not mean that all the batteries are completely charged. When the charge
indicator lamp
■ When charging is complete, which can take around 6 hours with fully dis-
charged batteries, the appliance automatically switches to a trickle charge
(maintenance function). Nevertheless, in order to avoid possible damage
to the batteries, do not leave the appliance permanently connected to the
mains adapter
■ Do not recharge the batteries again until the handheld vacuum cleaner's suc-
tion power becomes appreciably weaker and the charge indicator
lamp
NOTE
► Shortly before the batteries are completely discharged, the charge indica-
tor lamp
then switch off. Start the charging process.
► The handheld vacuum cleaner can also be charged directly via the mains
adapter
the wall bracket
plug
■ 10 │ GB │ IE
5
slips into the charging socket on the underside of the
7
lights up green, the batteries are charged to around 80%.
4
.
7
flashes green.
7
flashes green for approx. 60-120 seconds. The appliance will
4
. To do this, remove the barrel plug
3
and the cable from the cable routing. Insert the barrel
5
into the socket on the handheld vacuum cleaner.
6
has been pushed back (to the
7
flashes red and the
7
lights up green once the
5
with a slight twist from
SAS 7.4 LI E4
3
so