Time Setup - GRAUPNER 6444 Allgemeine Einführung

10. CONFIG SETUP SCREEN
10-1. CONFIG SETUP <1/3>
- TEMP SCALE
- BOTTON SOUND
- FINISH SOUND
- FINISH MELODY
- LCD CONTRAST
- LANGUAGES
- SUPPLY

10-2. TIME SETUP

- Set the Date, use the DOWN button to apply the setting. If dial is used and moved,
this should be not applied.
- Select RTC (Real Time Clock) and press the down button to confirm. This is ONLY
applied when DOWN button is pressed. If dial is used and moved, this should be not
applied.
- Time can be formatted as 12h or 24h.
Present time is shown at the bottom line.
10-3. USER NAME SETUP
- Write user name using up to 16 letters.
- This user name is shown at the initial display when the charger is connected to the
power.
Can be set to either "C" or "F"
Button can be set to ON or OFF
Even if the button sound is OFF, the charger should beep when error occurs.
Set operating time for finish sound.
Select melody for finish sound.
Set LCD contrast
set wanted language to be operated.
Set power voltage and current in case of using outside DC power.
If voltage and current are set, input power is automatically calculated.
Output is limited in accordance with input power (refer to page 13 on
operation description)
Page 36/53