Current Limit - GRAUPNER 6444 Allgemeine Einführung

- SET TEMP 2

- CURRENT LIMIT

9. MOTOR RUN-IN SCREEN (Warning: only use DC brushed motors or DC fans!)
- - - - - - - - = -
MOTOR RUN
MOTOR BREAK-IN <1/3>
SET VOLT _0.0V
SET TIME __0m _0s
RUNTIME 000m 00s
VOLTAGE _0.00V
CURRENT _0.00A
MOTOR BREAK-IN <1/3>
SET VOLT _0.0V
SET TIME __0m _0s
RUNTIME 000m 00s
VOLTAGE _0.00V
CURRENT _0.00A
MOTOR BREAK-IN <1/3>
SET VOLT _0.0V
SET TIME __0m _0s
RUNTIME 000m 00s
VOLTAGE _0.00V
CURRENT _0.00A
When it reaches the selected operation time, operation should stop.
Set tire temperature 2 for the best racing temperature.
Control output in accordance with temperature.
Set max currents which is delivered to tire warmer. The max. current should
be limited to 3.0A. Current is not increased any more when it reaches max
currents even if tire temperature does not match.
Program Mode
1st 2nd
V>_0.0 _0.0 _0.0 _0.0
T> _0m _0m _0m _0m
D> _0m _0m _0m _0m
SPEED:0
_0.00V _0.00A _0CYCLE
__0m00s
Program Mode
1st 2nd
V>_0.0 _0.0
T> _0m _0m _0m _0m
D> _0m _0m _0m _0m
SPEED:0
_0.00V _0.00A _0CYCLE
__0m00s
Program Mode
1st 2nd
V>_0.0 _0.0
T> _0m _0m _0m _0m
D> _0m _0m _0m _0m
SPEED:0
_0.00V _0.00A _0CYCLE
__0m00s
... 11x
Program Mode
1st 2nd
V>_0.0 _0.0 _0.0 _0.0
T> _0m _0m _0m _0m
D> _0m _0m _0m _0m
SPEED:0
_0.00V _0.00A _0CYCLE
__0m00s
Page
<2/3>
3rd 4th
CYCLE: _0
-00000s
<2/3>
3rd 4th
_0.0 _0.0
CYCLE: _0
-00000s
<2/3>
3rd 4th
_0.0 _0.0
CYCLE: _0
-00000s
<2/3>
3rd 4th
CYCLE: _0
-00000s
33/53
MOTOR Test <3/3>
Test voltage 0.0V
1st _0.0Aavg _0.0Apk
2nd _0.0Aavg _0.0Apk
3rd _0.0Aavg _0.0Apk
4th _0.0Aavg _0.0Apk
5th _0.0Aavg _0.0Apk
6th _0.0Aavg _0.0Apk