Using The Charger For The Fi Rst Time - GRAUPNER 7598 Bedienungsanleitung

Using the charger for the fi rst time
Description
Single cell voltage
Discharge target
Voltage for each cell
Minimum cell voltage
Cancel
Balance function
Programming the balancer
Can cel
Disc harge Bal ance
Mod e
12 Using the charger for the fi rst time
allow balancing
set key
／
value added key
／
External power
7.4 - 11.1 V DC,
BEC connector
For the fi rst use the minimum discharge- and balancer voltage must be che-
cked and adjusted if necessary. For this connect a battery to the balancer
connector on the side so that the display is activated.
1. Now press the left button
to adjust the discharge voltage. If you do not want to adjust anything,
press the „Mode" button again to go back to the basic display.
Check
Battery
Balance
Mode
Discharge
Mode
Dischrge Voltage set
Balance Voltage Limit
Total
Cancel
Discharge
Balance
Mode
Balancer function
value reduce key
Rx Batt．
JST
S
Receiver battery
1.2 - 12 V,
JR connector
„Mode" once for the balancer voltage or twice
Balancing Discharging
（
symbol
Cells in battery
pack
2S XH connector
3S XH connector
Balance mode
4S XH connector
5S XH connector
Discharge mode
2-6S EH connector
GND-
Total batteries
voltage
／
）